EAS主板英文说明书.docVIP

Electronic Article Surveillance （E- 3200 digital EAS） User’s Guide Ι Main technical parameters Transmitter: Power supply DC 24V DC source ＜300mA Safeguard 250V, 0.5A fuse Output current 180mA＜JP1＜240mA Center frequency 8.2MHZ ±0.05MHZ Scanning frequency bias ±500KHZ Scan rate 180HZ ± 1HZ Receiver: Power supply DC 24V DC source ______ in guard status ＜380mA in alarm status ＜380mA sensitivity 5μA Safeguard 250V, 0.5A, fuse radio-frequency bandwidth 7.5MHZ ～8.5MHZ Ⅱ Mounting tools instruments and meters Name Quantities 1、earth groove cutter 1 2、bumping electric hammer 1 3、hand electrical drill 1 4、adjustable wrench 1 5、iron hammer 1 6、clipper 1 7、bevel pliers 1 8、crosshead screwdriver 1 9、screwdriver for adjustment 1 10、universal meter 1 Ⅲ Environmental Conditions 1、Mounting position of EAS detector EAS detector cannot be set up in the distance of 0.5m from a metal door or 1m from any metal objects inducing the metal wall reinforcements, goods shelves, metal showcases, hand purchasing carts, etc. It is also not allowed to mount this detector in 2m nearby the money machines, ID devices for credit cards, telephones, computers, data cables, neon lamps, air conditioners, heaters, etc. 2、To ensure the EAS operation reliability, at first it is necessary to detect the interference sources and set the system far away from these sources if they are difficult to be removed. Generally, there are two kinds of interference: the first is active in nature such as the va