F35MnVN 非调质钢高温本构模型对比研究.PDF

第20卷摇 第5期 材摇 料摇 科摇 学摇 与摇 工摇 艺 Vol.20 No.5 摇 摇 20 12年10月 MATERIALS SCIENCE TECHNOLOGY Oct. ,2012 摇 摇 摇 摇 摇 摇 F35MnVN 非调质钢高温本构模型对比研究 王摇 进,褚摇 忠,李君飞,张摇 琦 (青岛理工大学 机械工程学院,山东 青岛266033) 摘摇 要:采用Gleeble-3800 热模拟实验机对F35MnVN 非调质钢在温度范围为950 ~1200 益,应变速率范 -1 围为0.01~5 s 进行等温、等应变速率压缩变形.依据所获得的流动应力曲线,拟合获得中间参数表达式, 分别获得动态回复-动态再结晶型和Arrhenius方程型两种本构模型.分别统计计算两种模型的预测值与实 验值之间的相关系数和相对误差,表明Arrhenius方程型本构模型具有更高的精度,且该模型形式简单,更适 合用于F35MnVN钢热锻造过程的数值模拟. 关键词:F35MnVN;非调质钢;流动应力;本构模型 中图分类号:TG142 文献标志码:A 文章编号:1005-0299(2012)05-0143-06 Comparative study on two types of constitutive model in F35MnVN microalloyed forging steel WANGJin,Chu Zhong,Li Jun鄄fei,Zhang Qi (Department of Mechanical Engineering,Qingdao Technological University,Qingdao266033,China) Abstract:Isothermal hot compression tests of F35MnVN steel were performed on a Gleeble鄄3800 thermo鄄me鄄 -1 chanical simulator in the temperature of950~1200 益 and the strain rate range of0.1~10 s to obatin the flow stresscurves.Dynamicrecorvery anddynamicrecrystallization鄄typeandArrhenius鄄typeconstitutivemodels were established respectively.Standrad statistical parameters such as as correlation coefficient and avergae ab鄄 solute relativeerrorwereemployedtoquantifythepredictability ofthetwomodels.Thecalculationresultsindi鄄 cate the Arrhenius鄄type constitutive model has high accuracy and suits to be used in hot foring simulation for F35MnVN steel. Key words:F35MnVN;microalloyed forging steel;flow stress;constitutive model