eigrp和ospf重分布.docVIP

R1： Router Router Router Routeren Router# Router# Router#conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#ho r1 r1(config)#int lo 0 r1(config-if)#ip add 1.1 *Mar 1 00:04:00.175: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback0, changed state to up.1.1 255.255.255.0 r1(config-if)#int s0/0 r1(config-if)#ip add 12.12.12.1 255.255.255.0 r1(config-if)#no shu r1(config-if)# r1(config-if)#exit r1(config)# *Mar 1 00:04:23.243: %LINK-3-UPDOWN: Interface Serial0/0, changed state to up *Mar 1 00:04:24.243: %LINEPROTO-5-UPDOWN: Line protocol on Interface Se