液晶显示txt（Liquid crystal display TXT）.docVIP

液晶显示txt（Liquid crystal display TXT） LCD txt.txt2008 is out of order. Everything is out of order! At this critical moment, China men to prove to the world: China men or normal! #includereg51.h #define uchar unsigned char #define uint unsigned int Uchar shh[]= 0 Hao Zhan; Uchar yih[]= 1 Hao Zhan; Uchar erh[]= 2 Hao Zhan; Uchar tablefw[]= Zhu Yi An Quan; Uchar table[]= 600 Lu; Sbit key0=P2^0; Sbit key1=P2^1; Sbit key2=P2^2; The definition of port ----------------*/ /*------------- Sbit RE=P1^0; / / recording selection end (0 recordings, 1 for playback) Sbit MSEL1=P1^1; / / mode setting terminal 1 Sbit MSEL2=P1^2; / / mode setting terminal 2 Sbit M1=P1^3; / / the first period of control or continuous recording control (active low) Sbit M2=P1^4; / / the second segment control or fast forward from control (active low) Sbit M8=P1^5; / / eighth control (active low) and operation mode option Sbit CE=P1^7; / / reset / stop or start / stop button (active high) Sbit lcden=P3^4; Sbit lcdrs=P3^5; Sbit dula=P2^6; Sbit wela=P2^7; Void, init (); Void write_com (uchar com); Void write_data (uchar date); Void delay (uint Z); Void, display (); Void, main () { Uint n; N=0; Key0=1; Key1=1; Key2=1; Init (); The definition of variable data type / * Uchar, okey, nkey, mkey, key1, key2; Uchar Key3, key4, keyfw, keygg, keycw; * / / / defined initialization variables 2 to take the definition / pull input port, the realization of 1X8 keyboard input signal 0 / / definition for the output port, the output pin data phase reaction, the realization of LCD control Flag1: while (1) { Along the road when the bus / station If (key0==0) { Delay (5); If (key0==0) / key debounce { If (n4) N++; Else N=3; Switch (n) { Case 1:{ Uint num; Init (); Write_com (0x80); For (num=0; num10; num++) { Write_data (table[num]); Delay (5); } Write_com (0x80+0x40); For (num=0; num10; num++) { Write_data (shh[num]); Delay (5); } Delay (5); break; } Case 2:{ Uint num; Init (); Write_com (0x80); for (num = 0; num 10; num + +