MAX阴影（MAX shadow）.docVIP

MAX阴影（MAX shadow） The difference between MAX method and shadow method and light shadow method (pure text version) Now, as long as its special, its called MAX method, and MAX is the biggest mistake Take a tricolor as an example, pure text version, slowly understand Effects and advantages of MAX painting Add the color level through the shading technique to enhance the authenticity and three-dimensional sense of the parts. Compared with monochromatic spraying, MAX coating with outstanding center highlights, enhancing edges shadows make surface look more natural character, this kind of coating to work step by step a rich expressive force is monochrome painting cannot achieve, at the same time of enhancing details make works more vivid and real. If youve ever used a spray gun, youve learned how to mix paint colors, and youve mastered the strength of the spray gun and the size of the air pressure, then MAX painting is not a difficult skill to master. Because it is painted on different layers, it is definitely regulated Section and modification are also feasible. BEFORE PAINTING the work Remove grease and dust with alcohol-based cotton swabs. Remove the finished debris from the part before spraying. A cotton rod soaked in alcohol is very useful. It removes oil stains from the fingers and allows the color to attach better. Before coloring, use the 1000 water to fill soil spraying parts. Use a few small tools to fix the parts, so as not to grease the fingers and leave the fingerprints on the surface. Dry the parts on the board that are filled with water. Youd better use some foam boards or planks to fit the painted parts. Black plus a lot of colors to get the BASE GRAY out, MAX calls it an ORIGINAL COLOR. Black plus a lot of colors to get the BASE GRAY out. , which need a lot of color in order to bring up the MAX BASE GRAY, dark brown, actually do can directly add some grey in the dark, bring up slightly, black is ok, does not have a large impact. Or the modulated directly b