华为QuidWay交换IP机配置命令手册（Huawei QuidWay switching IP machine configuration command manual）.docVIP

下载本文档

1
0
约9.25千字
约 13页
2017-07-26 发布于河南
举报
版权申诉

华为QuidWay交换IP机配置命令手册（Huawei QuidWay switching IP machine configuration command manual）.doc

1、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。。
2、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
4、该文档为VIP文档，如果想要下载，成为VIP会员后，下载免费。
5、成为VIP后，下载本文档将扣除1次下载权益。下载后，不支持退款、换文档。如有疑问请联系我们。
6、成为VIP后，您将拥有八大权益，权益包括：VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
7、VIP文档为合作方或网友上传，每下载1次，网站将根据用户上传文档的质量评分、类型等，对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档

华为QuidWay交换IP机配置命令手册（Huawei QuidWay switching IP machine configuration command manual）

华为QuidWay交换IP机配置命令手册（Huawei QuidWay switching IP machine configuration command manual） Huawei QuidWay switch configuration command manual huawei QuidWay switch configuration command manual 1, start Establish a local configuration environment and connect the hosts serial port to the Console port of the Ethernet switch by configuring the cable. Runs on a host computer terminal emulator (such as Windows hyperterminal, etc.), set up the terminal communication parameters for: 00 baud rate to 96 - bit/s, 8 data bits, 1 stop bit, no check and no flow control, and select for VT100 terminal types. The Ethernet switch is powered by an Ethernet switch, which displays the Ethernet switch from the end of the device, and then prompts the user to enter the return car after the self-check, and then the command line prompt (e.g. Quidway ) will appear. Type the command to configure the Ethernet switch or to see the Ethernet switch running state. Need help to type ? 2. Command view (1) user view (see the simple running status and statistics of the switch) Quidway : connect with the switch to enter (2) system view (configuration system parameters) [Quidway] : type system - view in user view (3) Ethernet port view (configure Ethernet port parameters) [quidway-ethernet0/1] : type interf in the system view Ace 0/1 Ethernet (4) VLAN view (configure VLAN parameter) [quidway-vlan1] : type VLAN 1 in the system view (5) VLAN interface view (configure VLAN and VLAN convergence corresponding IP interface parameters) [quidway-vlan-interface1] : in the department In the view, type interface vlan-interface 1 (6) local user view (configuring local user parameters) [quidway-luser-user1] : type locale-user in the system view user1 (7) the user interface view (configure user interface parameters) [quidway-ui0] : type user-interface in the system view 3. Other commands Set system time and time zone Quidway clock time Beijing? Add 8 The Quidway clock datetime 12:00:00 2005/01/23 Set the name of th