STRUC G安装步骤.doc

STRUC G 4.2.7a 安装步骤 进入Unix界面 建目录 Mkdir□/cdrom↙ Mkdir□/simadyn↙ chown□root□/simadyn↙ chmod□775□/simadyn↙ 挂光驱 mount□-r□-f□HS,lower□/dev/cd0□/cdrom↙ 文件解压缩 cd□/simadyn↙ tar□xvf□/cdrom/p32.tar↙ 摘光驱 umount □/cdrom↙ 安装 cd□struc.427/install↙ ./install↙ Which language should STRUC G utilize? Please select a language and enter the appropriate number. deutsch English :2↙ STRUC G V4.2.7A Installation INSTALLATION MENU STRUC G Installation Types: init --Machine initialization copy --Copy the STRUC G Master print --Define printer configuration acl --Setting the protection rights for STRUC G lang --Setting the language burn --Declare prommer to system end --Installation termination Please enter the Installation type: installinit↙ WORKBENCH DIRECTORY is /simadyn/struc.427! Enter the programming device in the system files Par --External parallel programmer Int --Internal parallel programmer Mel --MEL-PCJ-drive Cancel –Do not enter a device get_prom.ushpar↙ External parallel programmer at the printer interface Port address (Default 378-37a):378-37a↙ Interrupt number (Default 7):7↙ …… Protection rights setting completed installcopy↙ Copying the STRUC G Software WORKBENCH DIRECTORY is /simadyn/struc.427! Please enter the complete path name of the copy of the (Default:/simadyn/struc) install↙ …… Copy the printer/plotter meun files An machine initialization must be implemented for the destination workbench after the copy is made. installprint↙ Do you want to transfer the printer configuration of a previously installed STRUC G system? y yes (Default) n no :no↙ init_print.ush:Initialization of the printer/plotter for STRUC G Printer configuration… In order for STRUC G users to utilize the available plotters, it is necessary to generate a list containing specific information regarding