sad（悲哀的）.docVIP

sad（悲哀的） Building architecture simulation questions First, the multiple-choice question Multiple-choice questions 1. waterproof mortar used for building horizontal damp proof layer is not suitable. A. foundation damp building, B. foundation will produce deformation of the building C. building with too deep buried B foundation, D. building with small buried depth 2. is the roof flashing on the roof all the waterproof layer is paved along the roof part of the outstanding. A. port B. C. along the parapet deformation joint of vertical D D. 3. commonly used methods of artificially reinforcing foundations do not include which of the following? A. B. C. to change soil compaction pile raft foundation D D. 4. hall type combination is generally applicable to building types. A. hospitals, office buildings, primary and secondary schools, B. theaters, cinemas and gymnasiums C. railway station, bathroom, department store, D. hospital, exhibition hall, library, B 5. when the entrance of the door and window has a concentrated load, the beam can be used. A. flat arch brick lintel B. arch brick lintel C. reinforced brick lintel D. concrete beams D 6., pouring roofing, and its thermal insulation materials for. A. perlite, B. vermiculite, C. expanded perlite, D. polyurethane foam material D 7. lower, multi-storey residential balcony railing height should not be lower than mm. A.900, B.1000, C.1050, D.1100, B 8. for the wall with insulation requirements, it is necessary to improve its components. A. thermal resistance, B. thickness, C. compactness, D. material thermal conductivity A 9., for large and complex projects, architectural design generally adopts the design stage. A.1, B.2, C.3, D.4, C The section shape of room 10. is mainly determined according to the requirements. A. uses function, B., material technology, C., economic conditions, D. space, artistic effects, A 11. the available material for the floating floor of the rigid roof is. A. cement mortar, B. lime mortar, C. fine sto