03 Literature review - shodh.inflibnet.ac.in（03文献综述shodh.inflibnet.ac.in）.pdf

02. Literature Review The problems related to sheet metal forming for various types of sheet metals like advanced high strength steel, high strength low alloy steel, aluminum etc are categorized in four points like microstructure, mechanical properties, spring back and formability. MICROSTRUCTURE: The study of the effect of different variables, such as chemical composition and processing parameters on the deformation texture are observed. They conclude that the deformation texture development in low and high carbon steels is affected by the difference in the initial texture as well as by the presence and distribution of a second phase such as cementite in higher carbon steels. Deformation texture was simulated for both types of steels. [1]. Because of the higher applications in sheet metal forming, medium and high carbon steels present low workability and this condition becomes more critical as the carbon level is increased. A medium carbon steels (0.36% C) has shown that the pearlite lamellar morphology leads to undesirable cold working mechanical properties in highly stressed components [2].The purpose of this paper is to study the texture of alloy sheet by means of orientation distribution function and to discuss the effects of annealing temperature on the texture [3]. The scanning electron microscopy (SEM) and transmission electron microscopy (TEM) was used for more detailed microstructure analysis and evaluation of minority phases in high strength low alloy steel [4]. Medium carbon steels are mostly used for simple applications; however, new applications have been developed for which good sheet metal formability