FIDIC Particular Conditions of Contract（FIDIC特定条件的合同）.pdf

FIDIC Particular Conditions of Contract FIDIC Plant and Design-Build Contract MDB Harmonised Particular Conditions 1. Introduction There is a need for FIDIC to provide sample Particular Conditions that render the General Conditions of the 1st Edition 1999 of the FIDIC Plant and Design-Build Contract compatible with the Multilateral Development Bank (MDB) Harmonised Edition of the FIDIC Construction Contract. “FIDIC MBD” means the FIDIC “Conditions of Contract for Building and Engineering Works Designed by the Employer – Multilateral Development Bank Harmonised Edition – March 2006”. It is abbreviated as MDB. “FIDIC Design-Build” means the FIDIC “Conditions of Contract for Plant and Design-Build for Electrical and Mechanical Plant, and for Building and Engineering Works, Designed by the Contractor - First Edition 1999”. It is abbreviated as FDB. The sample Particular Conditions are offered as a service to industry on a best-effort basis. The suggested Particular Conditions have not been reviewed, commented on or approved by the Participating Banks that have licensed the use of the FIDIC Construction Contract for the MDB Harmonised Edition. These proposed Particular Conditions of Contract modify the FIDIC MDB Harmonised Construction Contract (March 2006 version) from design by the Employer (with remeasurement) to design by the Contractor (with lump-sum payment). 2. Notes Generally and unless the context otherwise requires, the provisions of the FIDIC Plant and Design-Build Contract, 1st Edition 1999, have been incorporated without alteration. However there are some cases where this has not been applied and these are detailed in Section 3 below. The Harmonised Construction Contract has been taken as the basic document. Any sub-clauses relating to design, payment and measurement have, where considered appropriate, been included in the Particular Conditions as amendments to the FIDIC MDB Harmonised Construction Contract. This also involves dele