Non-destructive testing of steel forgings - Part 2 ...(钢锻件的无损检测第2部分).pdfVIP

  • 12
  • 0
  • 约1.43万字
  • 约 7页
  • 2017-07-29 发布于浙江
  • 举报

Non-destructive testing of steel forgings - Part 2 ...(钢锻件的无损检测第2部分).pdf

Non-destructive testing of steel forgings - Part 2 ...(钢锻件的无损检测第2部分)

Non-destructive testing of steel forgings - Part 2: Penetrant testing (BS EN 10228-2:1998) 1 Scope This part of EN 10228 describes the method and acceptance criteria to be used for the penetrant testing of steel forgings. The method described is used for the detection of surface discontinuities. 2 Normative references This part of EN 10228 incorporates, by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed her

您可能关注的文档

文档评论(0)

1亿VIP精品文档

相关文档