圆锥滚子修形对接触副应力分布影响.pdfVIP

Mechanical Engineering and Technology 机械工程与技术, 2016, 5(4), 299-306 Published Online December 2016 in Hans. /journal/met /10.12677/met.2016.54036 Effects of Tapered Roller Crowing on Contact Stress Distribution Zhenzhi He, Minghui Shao, Jinhe Wu School of Mechanical Electrical Engineering, Jiangsu Normal University, Xuzhou Jiangsu th th th Received: Oct. 29 , 2016; accepted: Nov. 14 , 2016; published: Nov. 17 , 2016 Copyright © 2016 by authors and Hans Publishers Inc. This work is licensed under the Creative Commons Attribution International License (CC BY). /licenses/by/4.0/ Open Access Abstract Roller crowning of rolling element bearings is an important means to reduce the stress concentra- tion at the edge of contact pairs, and to improve bearing fatigue life. The contact model of crowned tapered roller/raceway contact pair is established in this paper, which is solved based on influ- ence coefficient method. The stress distribution of contact pair under light load and heavy load conditions are calculated respectively, and then the effects of tapered roller with different crown- ing curves on the contact stress distribution are analyzed. The results show that the logarithmic crowning has an optimal effect on contact stress distribution. However, the optimum modification curve corresponds to the actual working conditions. Moreover, the contact stress distribution of tapered roller/raceway contact pair is not symmetrical about the center line of roller, and the contact stress of the small end of roller is greater than the stress of the large end. Keywords Roller Crowning, Stress Distribution, Influence Coefficient Method 圆锥滚