PDM应用系统产品配置管理方法研究.pdfVIP

PDM 应用系统产品配置管理方法的研究———彭卫平　吴庆鸣　陈立平 PDM 应用系统产品配置管理方法的研究 1 1 2 彭卫平 　吴庆鸣 　陈立平 1. 武汉大学动力与机械学院 ,武汉 ,430072 　　　　　 2. 华中科技大学机械科学与工程学院 CAD 中心 ,武汉 ,430074 　　　　摘要 :针对现有 PDM 产品配置管理功能的不足 ,阐述了 PDM 应用系统产品配 置标识方法 ,该方法面向 CIMS 信息集成 ,通过扩展配置标识功能 ,支持企业产品 资源平台构建 ;提出了一个 PDM 应用系统产品配置评价模型 ,该模型面向产品开 发全过程 ,满足产品结构配置设计要求。以空调产品结构配置为例 ,介绍了所述方 彭卫平 　副教授 法在 KELON - PDMS 中的应用。 关键词 :产品数据管理 ;产品结构 ;配置标识 ;配置评价 ( ) 中图分类号: TP391. 7 　　　文章编号 :1004 - 132 Ⅹ2004 04 - 0317 - 05 Study on Method of Product Conf iguration Management in PDM Application Systems 1 1 2 Peng Weiping 　Wu Qingming 　Chen Liping 1. Wuhan University , Wuhan , 430072 2. Huazhong University of Science and Technology , Wuhan , 430074 Abstract : Aiming at the lack of configuration management in current PDM systems , a method of product configuration identification in PDM application systems was expounded firstly. This method is for information integrations of CIMS and can support for constructing product resource platforms based on con figuration identification functions extended. Then , a model of product configuration evaluation was also presented. This model is for overall processes of product development and can meet product structural con figuration needs. Finally , the applications of presented methods in KELON - PDM was introduced by tak ing air - conditioner structural configuration as an example. Key words : product data management ( PDM) ; product structure ; configuration identification ; config uration evaluation 0 　引言