飞秒激光切割金属的表面粗糙度-中南大学学报.PDF

飞秒激光切割金属的表面粗糙度-中南大学学报.PDF

  1. 1、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。。
  2. 2、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  3. 3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
飞秒激光切割金属的表面粗糙度-中南大学学报

第 46 卷第 12 期 中南大学学报( 自然科学版) Vol.46 No.12 2015 年 12 月 Journal of Central South University (Science and Technology) Dec. 2015 DOI: 10.11817/j.issn.1672-7207.2015.12.014 飞秒激光切割金属的表面粗糙度 谭超,孙小燕,银恺,罗志,夏国才,邓旺,周江夏子,段吉安 ( 中南大学 高性能复杂制造国家重点实验室,湖南 长沙,410083) 摘要:为提高激光切割金属的表面质量,用不同工艺参数的飞秒激光单次切割厚度为 100 μm 的铜箔,并采用弱 激光表面修复加工方法,取单次切割后最低粗糙度约为 694 nm 的表面进行弱激光再扫描修复。研究结果表明: 高能量飞秒激光切割金属存在热效应,扫描电镜显示表面有颗粒氧化物,实验得到再扫描修复加工的优化工艺参 数为:再扫描进给深度为 10 μm ,速度为 100 μm/s ,单脉冲能量为 50~100 μJ 。在最优条件下,再扫描 1 次的表面 粗糙度达 220~250 nm,再扫描 3 次的表面粗糙度小于 130 nm。该方法能有效提高飞秒激光切割金属的表面质量。 关键词:飞秒激光;金属切割;表面粗糙度;再扫描工艺 中图分类号:TN249 文献标志码:A 文章编号:1672−7207(2015)12−4481−07 Surface roughness of cutting metal by femtosecond laser TAN Chao, SUN Xiaoyan, YIN Kai, LUO Zhi, XIA Guocai, DENG Wang, ZHOU Jiangxiazi, DUAN Jian (State Key Laboratory of High Performance Complex Manufacturing, Central South University, Changsha 410083, China) Abstract: In order to improve the quality of metal surface cut by laser, 100 μm thick copper foils were cut by femtosecond laser with different parameters. Processing method of weak femtosecond laser rescanning was used to repair the copper surface whose minimum roughness was about 694 nm after the first cut. The results show that there is thermal effect when the copper foils are cut by high intensity femtosecond laser. Granular oxide can be found on the surface by scanning electron microscope. The optimum rescanning parameters of the surface repairing method are as follows: the feed depth is 10 μm, the speed is 100 μm/s and the single pulse energy is 50−100 μJ. Under the optimum c

文档评论(0)

youbika + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

1亿VIP精品文档

相关文档