-----------------------函数声明，变量定义--------------------- #include .DOC

//-----------------------函数声明，变量定义--------------------- #include reg51.h sbit RE_DE=P1^0; #define COUNT 10 // 定义接收缓冲区大小 #define Slaver_NUM 10 unsigned char bdata flag; //在可位寻址去定义一个标志变量 sbit time_over_flag =flag^0; //接收超时标志 unsigned char buffer[COUNT]; //定义缓冲区 unsigned char point; //定义缓冲区位置指示 unsigned char Slave_AD[Slaver_NUM]; //定义有效地址存放区 unsigned char ADD_num; //有效地址个数 unsigned char idata count_10ms; //用于表示有多少次10ms中断 unsigned char idata send_data[7]={ 0x31,0x32,0x33,0x34,0x35,0x36,0x37}; //与定义发送数据，共7位 void UART_init();