基于轴承负荷的暂态扭矩故障试验辨识.PDF

基于轴承负荷的暂态扭矩故障试验辨识.PDF

基于轴承负荷的暂态扭矩故障试验辨识

2014 年 1 月 机械科学与技术 January 2014 33 1 Mechanical Science and Technology for Aerospace Engineering Vol.33 No.1 第 卷 第 期 基于轴承负荷的暂态扭矩故障试验辨识 , , , 鹏 张文静 杨 兆建 宋高峰 王飞 ( , 030024) 太原理工大学机械工程学院 太原 : 扭矩扰动故障进行辨识 。通过 负荷传 感器直接采集轴承 摘要 基 于多轮盘转子系统的轴承 负荷对 , , , 负荷信号 结合 负荷对扭矩激励的敏 感度矩阵 对暂 态扭矩进行辨识计算 并与扭矩传 感器测得的 。 : 。 数据结果进行对 比分析 结果表 明 辨识结果的误差在 可接受 范 围之内 证 明 了基于轴承 负荷识 别暂 态扭矩扰动这一方法的可行性 。 : ; ; ; 关键词 轴承 负荷 暂 态扭矩 故障诊断 试验辨识 中图分类号:TK05 文献标识码:A 文章编号:1003-8728 (2014)01-0018-04 Experimental Identification of Transient Torque Fault Based on Bearing Load Zhang Wenjing ,Yang Zhaojian ,Song Gaofeng ,Wang Feipeng (College of Mechanical Engineering ,Taiyuan University of Technology ,Taiyuan 030024) Abstract :Based on bearing load signals ,the transient torque fault of a multi-support rotor system is identified in this paper. Bearing load signals are collected directly by the load sensors ,and the bearing load sensitivity matrix based on the incentive of torque is applied. The transient torque value produced by magnetic powder brake can be i- dentified with the proposed method. Compared with the actual value measured by torque transducer ,the identifica- tion error is in the allowable range. The proposed method for identifying transient torque is feasible. Key words :bearing load ;transient torque ;fault diagnosis ;experimental identification ,

文档评论(0)

1亿VIP精品文档

相关文档