工作评论 -2.pptVIP

第五次作业中文;同素异构转变: 温度 压力非晶态的晶化: 温度 扩散相分离: 温度结构弛豫: 温度;2-41某熔化的Pb-Sn焊锡具共晶温度，假设此焊锡50g加热到200℃，则有多少克的锡能熔进此焊锡中？（参见图2-112） ;从相图可见,具有共晶温度的焊锡成分约为61.9%Sn, 38.1%Pb; 而200℃时,Pb-Sn合金的成分为 80%Sn, 20%Pb. Pb的重量保持不变为 50×38.1% = 19.05(g) 200℃时的总重量则为: 19.05/20% =95.25(g) ∴溶入的Sn重量为 95.25-50 = 45.25(g);;10.5 Cite the phases that are present and the phase compositions for the following alloys:(a) 90 wt% Zn–10 wt% Cu at 400℃.(b) 75 wt% Sn–25wt%Pb at 175℃.(c) 55 wt% Ag–45 wt% Cu at 900℃. (d) 30 wt% Pb–70 wt% Mg at 425℃. (e) 2.12 kg Zn and 1.88 kg Cu at 500℃. (f ) 37 lbm Pb and 6.5 lbm Mg at 400℃. (g) 8.2 mol Ni and 4.3 mol Cu at 1250℃.(h) 4.5 mol Sn and 0.45 mol Pb at 200℃. ;赌靳炼冠茂囱蚂俩腕纹颂破轩蚊柏首檄汞凑休藤谷如闪茶惹猛蒜轩敌买酋工作评论 -2工作评论 -2;87%;10.5 (a)ε+η; Cε= 87 wt% Zn-13 wt% Cu, (Fig.10.17) Cη = 97 wt% Zn-3 wt% Cu; (b)α+β; Cα=15 wt% Sn-85wt% Pb, (Fig.10.7) Cβ= 97.5 wt% Sn-2.5 wt% Pb; (c) Liquid; CL =55 wt% Ag-45 wt% Cu; (Fig.10.6 ) (d) α; Cα=38 wt% Pb-62 wt% Mg; (Fig.10.18) (e) β+γ; Cβ= 49 wt% Zn-51 wt% Cu, (Fig.10.17) Cγ= 57 wt% Zn-43 wt% Cu; (f) L+Mg2Pb; CL =7 wt% Mg-93 wt% Pb; (Fig.10.18) C Mg2Pb =20 wt% Mg-80 wt% Pb; (g) α; Cα= 63.8 wt% Ni-36.2 wt% Cu (Fig.10.2) (h)β+ L Cβ= 97 wt% Sn-3 wt% Pb, (Fig.10.7) CL =75 wt% Sn-25 wt% Pb;;10.6 For an alloy of composition 74 wt% Zn–26 wt% Cu, cite the phases present and their compositions at the following temperatures: 850℃, 750℃, 680℃, 600℃, and 500℃. ;10.7 Determine the relative amounts (in terms of mass fractions) of the phases for the alloys and temperatures given in Problem 10.5. ;10.9 Determine the relative amounts (in terms of volume fractions) of the phases for the alloys and temperatures given in Problem 10.5a, b, and c. Below are given the approximate densities of the various metals at the alloy temperatures: ; (a)