220 kV双母线倒闸操作危险点分析及预控措施 Analysis and precaution control measure on dangerous point of 220 kV double bus bars reversal switch operation.pdfVIP

《宁夏电力》2013 年第3 期 220 kV 双母线倒闸操作危险点分析及预控措施 张 颖 （宁夏电力公司银川供电局， 宁夏 银川 750011 ） 摘 要： 随着宁夏电网变电站综合自动化改造工作的展开，220 kV 双母线倒闸操作越来越 频繁。通过对母线倒闸操作中母联断路器控制电源和母线隔离开关操作顺序的选择、母线隔 离开关辅助触点接触不良或未接触的成因分析，提出母线倒闸操作危险点预控措施。应用结 果表明：母线倒闸操作危险点分析有助于提升运行人员标准化倒闸操作水平，防止误操作事 故的发生。 关键词： 双母线； 倒闸操作； 危险点； 预控措施 中图分类号：TM645.11 文献标志码： A 文章编号：1672-3643（2013 ）03-0030-04 有效访问地址： / 10.3969/j.issn. 1672-3643.2013.03.008 Analysis and precaution control measure on dangerous point of 220 kV double bus bars reversal switch operation ZHANG Ying （Ningxia Yinchuan Electric Power Supply Bureau,Yinchuan Ningxia 750011,China） Abstract: With the substation integrated automation improvement developing in Ningxia power grid, 220 kV double bus bars reversal switch operation will be more and more frequently. Through the selection of switch operating sequence of bus bars connection circuit breaker control power source and bus bars isolating switch in the bus bars reversal switch operation, and the analysis of dangerous points bringing causes of poor contact or no contact on the auxiliary contact of bus bars isolating switch, puts forward precaution and control measure for the dangerous points in bus bars reversal switch operation. The application result shows that dangerous point analysis in bus bars reversal switch operation is helpful to improve operators ’standardization switching operation level and prevent misoperation hap⁃ pening. Key words: double bus bars; reversal switch operation; dangerous point; precaution measure DOI: 10.3969/j.issn. 1672-3643.2013.03.008 银川电网中的220 kV 变电站接线方式，主要 原理及危险点不能熟练掌握，很容易引发母线误 采用双母线接线和双母线单分段带旁路母线接线 操作事故，造成大面积停电，使系统受到严重冲 方式。倒母操作属