夹型屈曲约束斜撑及双核心自复位斜撑减震技术发展及应用.pdfVIP

上海蓝科建筑减震科技股份有限公司 夹型屈曲约束斜撑及双核心自复位斜撑 减震技术发展与应用 周中哲，锺秉庭，范廷海，郑宇岑，陈映全 （台湾大学土木工程学系，台北 10617 ） [摘要] 文章首先说明先前发展的夹型屈曲约束斜撑（Sandwiched Buckling-Restrained Brace）的耐震性能，并以 此为基础介绍兼具消能与自复位能力的双核心自复位斜撑（Dual-Core Self-Centering Brace ），多组斜撑试验均证 明夹型屈曲约束斜撑及双核心自复位斜撑在2.5%层间位移角下均可保持良好的耐震行为，超越美国AISC （2010 ） 规定的耐震标准。为进一步地了解自复位斜撑系统的耐震性能，本研究设计含BRB 及SCB 的三种不同高度的屈 曲约束斜撑构架（BRBF ）及自复位斜撑构架（SCBF），由非线性动力时程分析设计地震层级（DBE ）、最大地震 层级（MCE ）与近断层效应地震力下构架的耐震反应，非线性动力时程分析结果显示SCBF 相较于 BRBF 在地 震作用下有较小的层间侧位移与残余变形。 [关键词] 夹型屈曲约束斜撑；双核心自复位斜撑；耐震试验；非线性时程分析 Development and application of sandwiched buckling-restrained braces and dual-core self-centering braces Chou Chungche, Chung Pingting, Pham Dinhhai, Cheng Yutsen, Chen Yingchuan （National Taiwan University, Taipei 10617, China ） Abstract: This paper first presents cyclic test results and application of the proposed sandwiched buckling-restrained brace （BRB ）. The mechanics and cyclic behavior of a novel steel dual-core self-centering brace （SCB） are proposed and introduced, followed by testing of one dual-core SCB to evaluate its cyclic performance. Both braces achieve excellent performance up to a target lateral drift of 2.5%, exceeding the seismic requirement by the AISC Seismic Provisions （2010 ）. Moreover, three braced frames of varying heights are designed with two bracing members, SCBs and BRBs. Nonlinear time history analyses are conducted on these braced frames to obtain seismic demands under both design and maximum considerable levels of earthquakes and near-field earthquakes. The SCBFs generally exhibit smaller peak drifts and res