20号钢目录（Steel No. 20 catalogue）.docVIP

20号钢目录（Steel No. 20 catalogue） Steel No. 20 catalogue brief introduction Related performance characteristics chemical composition mechanical property Allowable stress of No. 20 steel: Brief introduction to the difference between No. 20 steel and No. 15 steel Related performance characteristics chemical composition mechanical property Allowable stress of No. 20 steel: The difference between No. 20 steel and No. 15 steel Edit this paragraph 20 of steel 20 means carbon content, containing 0.2% carbon, belonging to low carbon steel. Shanghai Kai Xin pictures Steel can be divided into low carbon steel, medium carbon steel and high carbon steel. Low carbon steel - carbon content is generally less than 0.25%; medium carbon steel - carbon content is generally between 0.25 to 0.60%; high carbon steel - carbon content is generally greater than 0.60%. In addition to containing carbon steel (C) element and for DNA and contains a certain amount of silicon (Si) (less than 0.40%), Mn (Mn) (generally not more than 0.80%, higher to 1.20%) alloy elements, does not contain other alloying elements (except residual elements). Containing less than 2.1% carbon; of steel; containing more than 2.1% of carbon; iron. The higher the carbon content in steel is, the worse the toughness is. The higher the carbon content in iron is, the better the toughness is. Edit this section for relevant performance Characteristic (1) characteristics of the steel is high quality low carbon steel, cold extrusion, carburizing hardened steel. The steel has low strength, toughness, plasticity and weldability. The tensile strength is 253-500MPa, elongation is greater than or equal to 24%. The 20 characteristic is similar to that of 15 steel, but the strength is slightly higher. Use: for the manufacture of automobiles, tractors and construction machinery manufacturing industry in the less important in small carburizing and carbonitriding parts, such as the automobile hand brake shoe, lever shaft, transmission speed