汽机安规答案（Steam turbine safety regulations）.docVIP

汽机安规答案（Steam turbine safety regulations） Turbine safety regulation examination questions answer Name achievement Fill in the blanks 1, all high temperature pipes, containers and other equipment should be thermal insulation, insulation should be guaranteed integrity. When the room temperature is 25 degrees, the surface temperature of the insulation layer is generally not more than 50 degrees centigrade. 2, all staff should learn electric shock, asphyxia first aid method, cardiopulmonary resuscitation method, and familiar with burns, scalds, trauma, gas poisoning and other first-aid knowledge. 3, for the rotating machine, no loading and unloading and correction of belts, or directly to the belt on the hand to sprinkle rosin and so on. 4, prohibit equipment bearing on the railing, pipe, coupling, safety cover or in the operation of walking and sitting. 5 all electrical equipment metal enclosures should have good grounding devices, the use of grounding devices are not allowed to dismantle or to do any work 6 any electrical equipment on the signs, in addition to the original placement personnel or responsible for the operation of the duty officer, no other personnel are allowed to move. 7 、 the monitor must allow the maintenance personnel to work after obtaining the value of the license and making the safety measures. 8, before the maintenance work begins, the work permit and the person in charge of work should go to the site together to check that the safety measures have been carried out properly, and then sign the work order before allowing the work to begin. 9, the work of the application of pen or ball pen to fill in two copies, after the work ticket issuer audit signature, by the person in charge of work together to the work permit for approval procedures 10, open the sewage door, you can use a special wrench, not allowed to use the sleeve set on the wrench to help open the sewage door. No blowdown door shall be repaired during boiler operation. 11, from the lower