批产与流水（Batch production and pipelining）.docVIP

批产与流水（Batch production and pipelining） [sharing] flow mode of production? What is the difference between mass production and flow production? (improved method) Here first do an experiment, and then tell the actual application. This test, using two different methods to fold 5 cranes, calculating the time required respectively with a stopwatch. The first method is to evenly divided into 5 processes, and at the same table evenly divided into 5 equal parts, then the provisions of their respective working area. The first step in the first working area to complete the folding 5 paper cranes, the semi-finished products into a box. The box moves to the next second workspaces and starts the second process. The same as the first step, the second step of the investment is still manufactured goods box, sent to the second work area, according to this, 5 paper cranes are to be completed by the 5 processes. Another way is to take a hand in dont let origami, finish each procedure in turn, until a folded paper cranes, so repeated 5 times. If you do not carry out this experiment to the people to see this phenomenon, he may say that the former method of each process to do a 5 paper cranes, seems very fast. But compare yourself with the stopwatch. You will find 5 papercranes completed time or after a fast. Why? Analysis: because the time interval between the latter processes is short, the number of times taken and released leads to differences in the results of the two methods. This allows you to think about, you think the former method first process after folding 5 paper cranes in the box, and then put the box to move to the next step, in this way, you see a few, take such action, moving there. Are you considering the latter method is that you take this paper in the machining process in the hands of all will go, the finished product will be finished soon, does not exist between the put, take, move. Speaking of this experiment, it is not only a good method on the assembly line of the f