烟道规范（Flue specification）.docVIP

烟道规范（Flue specification） Flue profile The flue, also called the exhaust duct, ventilation duct, and exhaust duct, is a tubular device used for the discharge of waste and smoke. Residential flue is used to eliminate kitchen smoke or toilet waste of vertical pipe products, is the residential kitchen and bathroom shared exhaust pipe system is the main component. Flue size Now the flue used are finished products, the choice should pay attention to size. The outer section size of the finished flue is mainly related to the number of layers. The higher the number of layers, the larger the size. The wall thickness of the finished product pipeline is only about 1cm, without taking into account the internal size. Common air duct profile dimensions: 6 layers below: 320X240 12 layers below: 340X300 18 layers below: 430X300 24 layers below: 460X400 30 layers below: 600X400 36 layers below: 600X500 As the pipe is installed after the main body is completed, the floor shall be provided with a plate hole, and the dimensions shall be larger than the 5cm of each side of the pipe. Flue specification 1, residential design code (GB50096-2011) article 6.8.2 requires exhaust products itself is to prevent the backflow of qualitative exhaust products. 2, the Ministry of Construction promulgated fly industrial standard of the construction of the residential kitchen, toilet and exhaust ports (JG/T194-2006), suitable for exhaust smoke made from various raw materials (except sulphoaluminate cement and Portland cement raw materials must obtain the certificate application related new material). 3, the national development and Reform Commission issued the building materials industry standard glass fiber reinforced cement exhaust pipe (JC/T854-2008), suitable for sulphoaluminate cement and Portland cement with alkali glass fiber cloth made of residential exhaust smoke, sulfur aluminate cement and Portland cement is the exhaust raw material can be determined with stable performance. 4, cement should