柴油机5（Diesel engine 5）.docVIP

柴油机5（Diesel engine 5） C 401. The correct structure of the cylinder liner is (). A. Radial and axial fixation of the cylinder liner B. The cylinder liner and cylinder cover are used for high pressure gas seal with copper gasket C. The lower shaft of the cylinder liner is not fixed, and there is a certain gap between the outer circle and the inner hole of the cylinder D. the cylinder is fastened to the cylinder body D 402. In order to ensure the reliability of the upper convex shoulder area of the cylinder sleeve, the measures to be taken in the structure are (). A. remove the combustion chamber B. borehole cooling C. remove the combustion chamber D. all of the above D 403. In order to ensure the reliability of the upper convex shoulder area of the cylinder sleeve, the measures that can be taken in the structure are (). A. remove the combustion chamber B. Reduce the wall thickness of the raised shoulder C. The cooling structure of high-convex shoulder drilling is adopted D.A and C A 404. The installation state of the cylinder liner is (). A. Upper fixation and free expansion of the lower part B. The lower part is fixed and the upper part expands freely C. Radial fixation and axial fixation D. Axial fixation, radial free expansion C 405. The sweep of the lower part of the cylinder liner of two-stroke diesel engine has the inclination of both directions. The purpose is (). A. Increase the strength of cylinder liner B. conducive to cooling C. Improved scavenging effect D. Increased air intake C 406. Oil groove and oil filling hole in the inner surface of the cylinder liner (). A. horizontal orientation B. tilt upward C. tilting downward D. Vertical layout D 407. The fabric tank structure on the cylinder liner of the two-stroke diesel engine is (). A. The oil groove is in an eight shape B. The oil groove is shallow The oil groove is narrower D. The deeper the oil tank, the better C 408. The two stroke curving flow scavenging diesel engine sets cooling water leak hole in t