挤出机原理（Principle of extruder）.docVIP

挤出机原理（Principle of extruder） In the extruder, the most basic and common one is the single screw extruder mainly including: transmission, feeding device, drum, screw, head and die, etc. The transmission part The driving part is usually composed of motor, gearbox and bearing. In the process of extrusion, the screw speed must be stable, not changing with the change of screw load, so that the quality of the products can be kept uniformly. But on different occasions, the screw can be changed to meet the requirements of different plastics or different products. Therefore, this part generally adopts