技术要求大全（The technical requirements are complete）.docVIP

技术要求大全（The technical requirements are complete） The technical requirements 1. Remove the oxide skin from parts. 2. Defects on the surface of parts, such as scratch and abrasion, etc. Remove the burrs. 4. After adjustment, HRC50 ~ 55. 5. Parts for high frequency quenching, 350 ~ 370 ℃ tempering, HRC40 ~ 45. 6. Carburizing depth of 0.3mm. 7. High temperature aging treatment. 8. The non-linear dimension tolerance should conform to the requirements of GB/T 1804-m. 1. Remove the oxide skin from parts. 2. Defects on the surface of parts, such as scratch and abrasion, etc. Remove the burrs. Sharp cor