400W PEP 线性宽带HF功放.pdf

APPLICATION NOTE Two-stage wideband HF linear amplifier for 400 W PEP using BLW96 and BLW50F AN98030 Philips Semiconductors Two-stage wideband HF linear amplifier for Application note 400 W PEP using BLW96 and BLW50F AN98030 CONTENTS 1 PART 1 SINGLE-STAGE WIDEBAND (1.6 − 30 MHz) LINEAR AMPLIFIER FOR 400 W PEP USING TWO BLW96 TRANSISTORS 2 PART 2 A SINGLE-STAGE WIDEBAND (1.6 − 30 MHz) LINEAR AMPLIFIER FOR 25 W PEP USING BLW50F TRANSISTORS IN 3 PART 3 A TWO-STAGE WIDEBAND H.F. LINEAR AMPLIFIER FOR 400 W PEP USING TWO BLW96 AND BLW50F TRANSISTORS 1998 Mar 23 2 Philips Semiconductors Two-stage wideband HF linear amplifier for Application note 400 W PEP using BLW96 and BLW50F AN98030 SUMMARY This report is in three parts, each numbered separately. Part 1 shows that a wideband power amplifier module providing up to 400 W PEP from 1.6 to 30 MHz can be made using two BLW96 transistors. Operating from a 50 V supply, the IMD at 400 W PEP over the band is better than −26 dB when loaded with a 50 Ω wideband load. Part 2 describes a suitable drive amplifier using two BLW50F transistors in class A (at the same supply voltage (50 V). The IMD of the drive amplifier is better than −40 dB into a 50 Ω load. Part 3 describes a complete design in which the driver and main amplifiers are combined using direct inter-stage impedance transformation. 1998 Mar 23 3 Philips Semiconductors Two-stage wideband HF linear amplifier for Application note 400 W PEP using BLW