综采工作面推进速度对支承压力影响研究.pdf

Mine Engineering 矿山工程, 2016, 4(1), 43-49 Published Online January 2016 in Hans. /journal/me /10.12677/me.2016.41008 Study of Abutment Pressure on Fully Mechanized Working Face Advancing Speed 1,2 1,2 1,2 1 1 Donghai Xie , Chuanqu Zhu , Zhuohui Zhu , Ze Zhou , Yi Ou 1 School of Mining and Safety Engineering, Hunan University of Science and Technology, Xiangtan Hunan 2 Hunan Provincial Key Laboratory of Coal Mine Safety, Xiangtan Hunan th th th Received: Aug. 11 , 2015; accepted: Jan. 26 , 2016; published: Jan. 29 , 2016 Copyright © 2016 by authors and Hans Publishers Inc. This work is licensed under the Creative Commons Attribution International License (CC BY). /licenses/by/4.0/ Abstract In coal mine production, the speed of working face advancing is one of the important factors af- fecting the support pressure. Based on the 21126 production technology and geological conditions of fully mechanized working face of Huopu Mine, the in-situ rock pressure measurement and FlAC3D numerical simulation, the behavior regularity of the mine pressure at different advancing speeds is studied. Research shows that: in the 35 - 80 m segments in front of the working face, stress change is bigger, strongly affected by mining; within the scope of 35 m in front of the work- ing face, stress changes drastically, seriously affected by mining; when the speed is greater than 7 m/d, the plastic zone at the right side of the stone door increases; surrounding rock at the right side looses; caving phenomenon is obvious and support work becomes harder. So, working face