安装工程笔记（Installation engineering notes）.doc

安装工程笔记（Installation engineering notes） 1. What does the power cable zr-yjv-0.6/1kv4 x 70 + 1 x 35 mean? YJV: cables type name copper core of polyethylene insulation outer skin The product is provided with the rated voltage (U0 / U) 0.6/1 -- -26/35kv power line transmission and distribution 4 * 70 + 1 * 35: indicates that this cable is 5 core, 4 70 square millimeter, 1 square 35 mm. YJV YJLV copper (aluminum) core crosslinked polyvinyl chloride insulated sheath power cable laying in indoor, trench and tube, also can be buried in loose In the soil, there is no external force YJV22 YJLV22 copper (aluminum) core crosslinked polyvinyl chloride steel tape armored sheath power cable laying in the ground, able to withstand mechanical forces, but cannot withstand greater tensile force YJV32 YJLV32 copper (aluminum) core crosslinked polyethylene insulated wire armored PVC sheathed power cable for high drop zone, the cable can withstand mechanical forces and considerable pull 2. In electrical engineering, BV2 * 2.5, BV3 * 2.5 what do you mean? BV stands for insulating material, which refers to copper core polyvinyl chloride insulated wire 2 * 2.5 is 2 2.5 square mm wires 3 * 2.5 is three 2.5 square millimeters 3. Electrical wiring bv-4 nhbv-2.5 (fire resistance) If you dont pay attention to the difference, four squares and the following are considered according to the line of light, six square meters and above the power distribution. When the wire section of the lighting circuit is greater than 6mm2 or equal to the above, the corresponding project should be carried out on the power line. The illumination and power below 6mm2 are applied to the quota. Several principles: 1. Generally, the line sets of lighting distribution boxes come out from the lighting distribution box, from the power distribution box. 2. If the single-path lighting circuit is from the power distribution box, it is also a lighting circuit. 3. For lighting and the same use of a line of less than 4 square mill