印刷基础知识须知（Basic knowledge of printing）.doc

印刷基础知识须知（Basic knowledge of printing） Basic theory of printing - four colors and dot introduction Four-color printing As long as the R + G + B three color is proportional to the proportional collision can produce a ten million colors. Why black? Right, R.G.B equal proportion can produce black, but to three kinds of printing ink can be created a kind of color, from the economic point of view doesnt work. And actually in the process of design the use of black is very much, this is why use four-color printing. And one more thing: RGB generated black compared with black ink directly allocate and, after the former there is a feeling of vain, while the latter felt relatively heavy fact. 1. There are four color principle, we will be much easier to accept. It is equivalent to the output of four film, is also equivalent to PHOTOSHOP channelscyan inside, magenta, yellow, black (C, M, Y, K) four channels. When we deal with the image of the channel change, the actual changes to the film. 2. Net Angle flat screen and hang net mesh nodes. Mesh: per square inch, the number of outlets, common printed with 175 mesh, and newspapers with 60 mesh to 100 mesh, depending on the paper. Special printing has special mesh, depending on the quality of a material. Outlets: round. Ellipse. Diamond. Square. Diamond shaped. FM outlets, etc. Net Angle: the most closely linked to network with the straight line formed by the horizontal Angle. There are 30 degrees, 45 degrees, 75 degrees, 90 degrees (0). Net: the dot of the whole film is distributed evenly and the same size, like a plane, without a layer sense Network: the dot size is different, and the screen is layered. What should be done before exporting the film The format of the file The output center of the current output center is mainly used in the output system of the square grid century RIP (PSPNT), and the output system of HQ510, the angel of Israel and Heidelberg. All support the postscrit printer description file. The suffix is called t