汽车手册12（Automobile manual 12）.docVIP

汽车手册12（Automobile manual 12） It is. For the pores in the assembly, seals shall be sealed to prevent air, moisture and dust from entering the interior. 2. Prevent aging and deterioration of rubber products The rubber products on the car, such as tires, belt, and dustproof cover, often can be aged, expanded or shaped, which can make the performance worse and shorten the service life. Rubber products as aging, is mainly due to the rubber of unsaturated polymer hydrocarbons, easy to absorb the oxygen in air oxidation, at the same time, there is still a permeability vulcanized rubber, oxygen easy access to the internal oxidation. In particular, direct sunlight can cause the rubber to age rapidly. Rubber products are contaminated with gasoline and oil, which can cause bulk expansion, loosen gelatine and decrease elasticity. In order to prevent the aging of rubber products, direct sunlight and mineral oil contact should be avoided. 3. Prevent the mildew and carpet of cotton and linen products, and absorb water easily. Especially in wet area and rainy season, more prone to damp mould. Therefore, the car owner should check the cotton and linen products on the car, and dry them in time. 4. Reduce the anti-knock performance of gasoline The anti-knock performance of gasoline is determined by the octane value of gasoline. The long-term shutdown of the automobile, the octane value of gasoline will decrease with the loss of the lightweight components and the increase in the content of colloid, thereby reducing the anti-detonation. Therefore, the gasoline tank should be tightly closed and avoid overheating. Gasoline should not be stored for too long. Check the working condition of the engine frequently Start the engine at least once a month, idle for 4-5min, check the running of the engine. If there are abnormal phenomena, timely adjustment and maintenance will be required. Also, check the battery regularly. The electrolyte liquid level of the accumulator must be higher than 10-15m