水泥稳定土基层（Cement stabilized soil base）.docVIP

水泥稳定土基层（Cement stabilized soil base） Cement stabilized soil base construction technology standard (Ⅷ 110) 1 scope of application This standard is applicable to the construction of the base and base level of the construction of the new and rebuilt expressway and the first grade highway cement. Cement stable soil includes: water soil, cement sand, cement stone debris, cement gravel, cement gravel and so on. 2 construction preparation 2.1 material 2.1.1 soil: the general requirements for soil are easy to break and meet a certain level of grading to facilitate the forming of crushing. Highway engineering is used in the cement stabilized soil layer, usually according to the composition of soil particles (including crushed stone, gravel and sand material, not including clump or soil) particle size and composition of the soil is divided into the following three: Fine grained soil: the maximum particle size of the particle is less than 9.5 mm, and the particle content of which is less than 2.36 mm is not less than 90% (such as various cohesive soil, silty soil, sandy soil, sand and stone cuttings, etc.). Medium grained soil: the maximum particle size of the particle is less than 26.5 mm, and the particle content of which is less than 19mm is not less than 90% (such as gravel, gravel, graded gravel, graded gravel, etc.). Coarse grained soil: the maximum particle size of the particle is less than 37.5 mm, and the particle content of which is less than 31.5 mm is not less than 90% (such as gravel, gravel, graded gravel, graded gravel, etc.). 2.1.2 the coarse soil and medium grained soil used in the cement stable soil should meet the following requirements for highways and first class roads: 2.1.2.1 when the cement stabilized soil is used as the base level, the maximum particle size of the constituent particles shall not exceed 37.5 mm. The homogeneous coefficient of soil should be greater than 5. The liquid limit of fine grained soil is no more than 40%, and the plasticity ind