电工进网作业许可考试复习题一(判断题)(高压)(2013年版)（Examination questions of electrical entrance work permit (review) (high pressure) (2013 Edition)）.doc

电工进网作业许可考试复习题一(判断题)(高压)(2013年版)（Examination questions of electrical entrance work permit (review) (high pressure) (2013 Edition)） Electrical network operating license exam review (a judgment test) (high) (2013 Edition) Release date: 2013-3-1 12:20:00 ? The voltage between 1 and two line called the line voltage. (U??) 2, the greater the flux, said the stronger the magnetic field. (r?) 3, when the power waveform is not strictly a sine wave, it has a lot of harmonics, harmonic of electric equipment of great harm, can make the transformer core loss increased significantly, so that the transformer overheating, not only increases the energy consumption, and the accelerated aging of insulation medium, shorten the service life. (U) 4, a large power system constitutes a ring, double loop network, the power supply for important users are guaranteed when the system in a local fault or a part of the line to repair, can run to change the way of power network, users of continuous power supply, reduce the power losses. (U?) 5 main features of low resistance grounding mode is better to limit the single-phase grounding fault current, harmonic suppression arc grounding overvoltage, single-phase grounding fault is not immediately after the trip, not to aggravate the burden of the insulation of electrical equipment. (r?) 6, electricity production with power generation, power supply and utilization at the same time characteristics, determines the power generation, power supply and utilization must keep balance of power, with the increase of electricity instantaneous change. (U?) 7, in a certain period, the voltage change sharply and deviate from the maximum value of the phenomenon, called voltage fluctuation. (R) 8, the use of water resources contained in the river to generate electricity, the power plant called hydraulic power plant. (U?) 9, for a class of load power requirements, by two independent power supply when a power failure occurs, another power should not be damaged. (U?) 10,