电机大修（Motor overhaul）.docVIP

电机大修（Motor overhaul） 5.1 overhaul preparatory work before Check the motor vibration, current and temperature, the bearing should sound 5.1.1 overhaul before, according to the inspection and preventive test records and maintenance records for overhaul and repair projects plan. 5.1.2 organization learning process and maintenance personnel maintenance measures and matters needing attention, and technical disclosure, clear division of labor. 5.1.3 in accordance with the equipment, materials and maintenance records must be ready to overhaul overhaul project, the lifting tool careful examination, when necessary, pull test. 5.1.4 according to the electrical safety regulations for the work ticket formalities, do on-site safety measures and safety tests. The disintegration of 5.2 motor The disintegration of the 5.2.1 motor, should be based on the specific structure of each motor and the field maintenance condition and ensure the correct implementation of security, lifting large motor should be heavy with 5.2.2 large motor disintegration of conventional steps 5.2.2.1 open the cable head, cable head three-phase short-circuit grounding, protect and support. 5.2.2.2 remove the motor of anchor bolts and screws, the wheel shell grounding and cooling device etc.. 5.2.2.3 to remove the wheel. 5.2.2.4 first open end cover cover, non load bearing, and then split the load side end cover, bearing cap. 5.2.2.5 the installation of special tools, out of the rotor. The conventional method of 5.2.3 pump rotor: 5.2.3.1 small motor direct extraction by manual. 5.2.3.2 driving hook connected false axis pump. 5.2.3.3 in the motor seat is fixed on a dedicated rail pump rotor. 5.2.3.4 driving or monorail cantilever tool pump rotor. 5.2.3.5 chain cantilever crane tool and Xiaoping car mobile pump rotor stator. The quality of the break-up of the 5.2.4 request: The components and 5.2.4.1 removable anchor spacers should be open to the phase lead mark, mark, and keep the original demolition of the orig