矿山安全技术（Mine safety technology）.docVIP

矿山安全技术（Mine safety technology） March 7, 2005 1, the subject content and scope of application This standard defines the term and definition of mine safety. This standard applies to relevant departments, regulations, standards, regulations, specifications, documents, teaching materials, documents, books and manuals, and is also applicable to teaching, scientific research, production, management, press and publication, and international contacts. 3 roadway driving Numbers; nomenclature; English names; definitions and descriptions; code names; synonyms 3.1 sealing disk shaft cover to ensure safe operation in shaft, disc structure door and wellhead orifice mouth set cover 3.2 fixed disk shaft collar, in order to ensure the safety of shaft sinking operation and the purpose of shaft survey, the disc structure is arranged in the proper place under the sealing plate 3.3 safety ladder safety ladder sinking, suspended in the shaft above the working face, the metal ladder for personnel emergency security Masui A ladder is arranged between the 3.4 ladder shafts in the ladder shaft for the upper and lower access passages Compartment 3.5 sidewalks, pedestrain mine, secondary door, pedestrian access Way 3.6 Safety Road Reserve way access to the ground by the well neck, access exit, exit 3.7 avoid the hole, man hole on the side of the tunnel, just for personnel escape line A room where a vehicle or blasting operation is harmful 3.8 the protection rock column protective is at the top of the deep section of the shaft, which is safe for the protection of the deep extension operation A section of rock left by plug 3.9 protected protection stage to prevent protective rock loosening and falling, which is close to the disc Stage structure 3.10 artificial protection protective is used to protect the working face of the extended working face, and it is safe in the well of the original shaft Bulkhead A temporary structure constructed to prevent falling and wounding 3.11 safety shed safe shed