磷化（Phosphating）.docVIP

磷化（Phosphating） Study on Rapid Phosphating Process at normal temperature Study on Rapid Phosphating Process at ambient temperature evergreen 1, Wang Jian Two (1. 、 School of environmental and biological engineering, Industrial and Commercial University Of Chongqing Chongqing 400033; 2. 、 School of materials science and engineering, Chongqing University Chongqing 400044) [Abstract Based on the study of several phosphating solutions The composition and phase of a phosphating solution at room temperature was determined by orthogonal test and comprehensive evaluation Process parameters The uniformity, corrosion resistance and surface morphology of the phosphating film were detected and analyzed. [keyword Room temperature Phosphating Fast Phosphating film Physical properties Study, on, High, Speed, Phosphating, Technology, at, Room, Temperature [CLC number ]TG174. 451 [document identification code ]B [article number ]1001 -3660 (2003) 03 -0040 -04 CHANG, Qing1, WANG, Jian2 (1., Environment, and, Biology, Engineering, Department, Chongqing, Technology, and, Business, University, Chongqing 400033, China; 2., Materials, Science, and, Engineering, college, Chongqing, University, Chongqing, 400044, China) [Abstract], Based, upon, the, research, a, few, phosphatizing, liquids, this, paper, determines, on, the, components, of, Phosphatizing Liquid, and, its, corresponding, technological, parameter, by, doing, quadarature, experiment, and, comprehensive, assessment, and, examines And, analyzes, the, proportion, erosin2resistence, and, surface, shape, of,, the, phosphatization, membrane. [Keywords] Roomtemperature; Phosphatization; Highspeed; Phosphatingfilm; Physicalproperty 0 Introduction * 2.5mm (long) * width * thickness ) 1.2 test instruments and equipment Phosphating is a process for weighing and forming phosphate chemical conversion coatings on metal surfaces T6628 analytical balance (accurate to 0. 1mg) Process. According to the national standard [1] steel surface is used