磷化生产工艺（Phosphating process）.docVIP

磷化生产工艺（Phosphating process） Phosphating process Wet grinding process The phosphate ore is carried out by the overhead crane in the warehouse. Caught in the storehouse, phosphate ore bucket, the plate feeder to the crusher, crushing after crushing by belt conveyor to the crushed ore storage bucket, and then through the disc feeder, the broken ore by belt scale, into the ball milling grinding pulp by drum sieve to large particles in the pulp density measurement, into the slot, and finally into the slurry tank, the double cylinder diaphragm pump through the electromagnetic flowmeter is sent to the Phosphorite Acid decomposition reaction tank. Two water wet process phosphoric acid production process The ore pulp delivered from the raw material section is measured into the acid hydrolysis reaction tank, and the sulfuric acid is fed into the acid hydrolysis tank by a sulphuric acid pump through the metering tank. The mixture of phosphoric acid and phosphogypsum is obtained by acid hydrolysis and the slurry pump is sent to a disk filter for filtration and separation. In order to reduce the slurry temperature in the reaction tank, a blower is used to cool the air. The fluoride gas discharged from the acid hydrolysis tank is absorbed by water through the Venturi absorption tower. The absorption solution is circulated to the Venturi absorption column for cyclic absorption. The exhaust gas is exhausted by the exhaust fan and the exhaust cylinder. The filtered gypsum cake is washed and unloaded into a spiral conveyor and sent to a gypsum yard by an adhesive tape conveyor. The filter cake adopts three counter flow washing process, flushing the filter, filter plate and floor sewage to the closed sewage circulation system. The reaction inside filter liquor in a gas-liquid separator, gas liquid separation, filter liquor filter into the corresponding intermediate washing tank inside the filter liquor. The filtrate phosphoric acid passes through the filtrate pump a and a part is sent