彩钢房安装工序（Color steel housing installation process）.doc

彩钢房安装工序（Color steel housing installation process） How to do color steel room? The first step: Foundation Survey 1. Measure the length and width of the foundation with the tool ruler, and verify whether it is consistent with the size of our business personnel; 2. Observe whether the other requirements of the foundation are in accordance with the requirements of our business personnel; 3. If the customer fails to provide the foundation on request, the engineering team can propose to the engineering manager, and the project manager will make timely representations to the relevant departments and personnel. The second step: release line. 1, on the ground mark according to the requirements of installation position of ink to provide location pop-up geosyncline, the basis for the next installation of geosyncline; 2, the line only needs to put the front wall and the geosyncline line; 3, if it is standard type house, the distance between the front wall and the geosyncline line is 6.26 meters, if the nonstandard type house needs special explanation; 4, the front wall and the geosyncline line are respectively 10 cm along the standard foundation. The third step: geosyncline iron. 1, the second steps of the operation of the ink, put the geosyncline iron; 2, the outer edge of the ink with iron geosyncline; 3, the expansion tube, the standard type of geosyncline iron each with eight expansion tube, need to play full. The fourth step: Anping beam. 1. Move a flat beam and the front and rear columns into the proper location of the foundation; 2, the flat beam on both sides of the screw holes are aligned on the front and rear columns, the middle of the Han iron screw hole; 3. Screw the upright post and the flat beam. Note: screw not less, not. The fifth step: the support beam, the front and back of the two links. 1. Lift the flat beam and upright column of the fourth steps; 2. Block the column feet into the geosyncline iron, and align the column foot screws with the screw holes on the