smt考试试卷（SMT test paper）.docVIP

smt考试试卷（SMT test paper） Hunan Railway Professional Technology College, 2010 academic year, second semester, first stage SMT patch technology process assessment papers (class: hardware level 09) scoring: First, fill in the blanks (1 points per minute, 40 points) 1.1inch = 25.4 mm 2. usually we say the component sizes, such as are for components, resistors, capacitors, inductors. 3. for a resistance of 0805, the length of its parts is 0.08in, the width of the parts is 0.05in, converted to metric, the length of its parts is 2mm, the width of parts is 1.2mm 4. common SMT component referred to as: resistance is referred to as: R, C, is referred to as the capacitance of the inductance is referred to as: L exclusion, referred to as: RN, diode triode referred to: D, abbreviation: Q, abbreviation: F, referred to as the fuse of tantalum capacitor TAN, electrolytic the capacitor is referred to as: CAP crystal, referred to as: Y connector, referred to as: KMJ base, referred to as: J. 5. common IC categories include: QFP, SOP, SOJ, PLCC, BGA, and so on. 6. have a screen printing resistance was 330, the resistance is 33 ohm, screen 4443, the resistance is 4K7 ohm, silk screen, its resistance is 4007 ohm. The unit of capacitance of the 7. is the F. 8. the capacity of a capacitor is 3N7, its capacity is 3700 PF, capacity is 473P, and its value is 0.047 PF. 9. kinds of common feeders are tape feeders, tubular feeders, disc feeders, and bulk feeders. 10. machine according to the structure type: composite type, arch type, turret. 11.. Melting point of lead-free solder paste is 183. 217. Two, the multiple-choice questions (1 points for each option, 30 points) 1. what does not belong to solder is: (D) A. melts are lower than other metals and B. is better than other metals at high temperatures C. physical properties can meet the welding conditions, D. at low temperatures better than other metals 2. when the dihedral angle greater than 80 degrees, which can be called non attachm