tekla深化步骤（Tekla deepening steps）.docVIP

tekla深化步骤（Tekla deepening steps） I. operation flow 1, set the axis; 2 set up or set up a work view; 3, 3A produce preliminary layout, establish the main component, sub component; 4, establish nodes or details; 5, execution number; 6. Modify layout drawing, generate component drawing and part drawing; 7. Generate reports; 8, output CAD chart file or DXF file. Two, matters needing attention 1, set the axis: A, according to the design detailed and correct interpretation of each adjacent axis distance, and in accordance with the XSTEEL software axis settings, type the correct data set up. B, check action: Output a preliminary layout of the axis, mark the axis, distance or elevation, print the surface and check the data and the correct name of the axis. C and prepare beforehand: read the design in detail, and check carefully for less clearly. 2 set up or set up a work view: A, select the appropriate view attribute settings, use the XSTEEL grid line view function to generate all the relevant main work views, or set the conditions automatically, resulting in a work view that can not be automatically generated. B, check action: Check that the view property settings are appropriate. (whether the filter conditions are reasonable) See if the work view name is correct. To see if the depth is correct. See if the plane and stereo settings are right. C, preparation in advance: Read in detail the maximum depth of each elevation of the design drawing, so as to select the suitable depth data. Judge the content of the component expressed by the facade to facilitate the arrangement of the drawing. 3. Build the main component: A, detailed design specifications, all components of the reading material, location, elevation, the working point of surface treatment and other important information, sorted by size, categories and other factors, and then set the material code to enter the profit model; input to comply with components and parts and the numbering principle from left to right, from