考虑规格材布置方式胶合木梁柱螺栓钢填板节点性能研究.pdfVIP

考虑规格材布置方式的胶合木梁柱螺栓-钢 填板节点性能研究# 宋晓滨，王明谦，顾祥林，张云帆** 5 （同济大学建筑工程系，上海200092） 摘要：本文通过单调和低周反复加载试验研究改变规格材布置方式提高胶合木梁柱螺栓－钢填板节点的转 动性能。胶合木通常水平铺设和胶合规格材，在弯矩作用下节点区胶合木构件易发生脆性的横纹劈裂破坏。 通过竖向布设和胶合规格材，胶合层较高的强度可延缓木材横纹劈裂，从而提高节点延性。试验结果表明， 10 竖向胶合的梁柱螺栓－钢填板节点延性有显著提高。此外，在单调荷载作用下节点极限承载力、转角以及 破坏弯矩所对应的转角比水平胶合节点分别提高27% ，62%和68% ；在低周反复荷载作用下，节点的耗能 比提高近20 ％。本文研究成果对于胶合木结构的合理设计、应用具有重要的工程意义。 关键词：胶合木；规格材布置方式；梁柱螺栓－钢填板节点；单调加载；低周反复加载；延性；耗能比 中图分类号：TU366.3 15 The rotational behavior of bolted glulam beam-to-column connections with different lamina alignments Song Xiaobin, Wang Mingqian, Gu Xianglin, Zhang Yunfan (Department of Building Engineering , Tongji University, Shanghai 200092) 20 Abstract : This paper presents the results of monotonic and cyclic loading tests on the rotational behavior of bolted glulam beam-to-column connections with different lamina alignments. The commonly used horizontal alignment and gluing pattern of glulam in the beam-to-column connections is prone to perpendicular-to-grain tensile failure. Correspondingly, the connections often fail brittlely under rotational actions. By aligning and gluing the glulam laminas vertically, the gluing layers, which 25 are of higher stiffness and strength than wood in perpendicular direction, can hamper the perpendicular-to-grain cracking and thus improve the ductility of the beam-to-column connections. Test results indicated that under monotonic loading the maximum moment and the corresponding rotation angle and the rotation angle corresponding to the ultimate moment of the vertically aligned connection were improved by 27%, 62% and 68%, respe