45钢喷射电镀Ni层激光重熔温度场数值模拟及参数优化.pdfVIP

40 3 Vol.40 No. 3 2008 6 Journal of Nanjing U niversity of Aeronautics Astronautics Jun. 2008 45 Ni 刘志东　陈　勇　黄因慧　田宗军　何静波 ( , , 2 00 6) : 研究了45 钢喷射电镀Ni 层激光重熔温度场的分布规律, 考虑了热物性参数、对流 热、相变潜热等随温度 变化的因素, 应用ANSYS 有限元分析软件, 建立了连续移动三维瞬态激光重熔喷射电镀Ni 层温度场的计算模 型。为了在喷射电镀 层激光重熔过程中获得表层质量较好, 且尽量厚的硬化层, 利用建立的模型, 通过选择合 Ni 适的激光加工工艺( 激光功率、扫描速度和光斑半径) , 获得了较为理想厚度的硬化层。 : 喷射电镀; 激光重熔; 温度场; 数值分析; 参数优化 :T G665:A : 005-26 5( 2008) 03-0385-05 Numerical Analysis and Parameter Optimizing on Temperature Field of - - 45 Laser Re melted Ni Coating Oriented by Jet lectroforming of Steel L iu Zh idong , Chen Yong , H uang Yinhui, Tian Zongj un , H e J ing bo ( College of Mechanical and Elect rical Engineering, Nanjing University of Aeronautics Ast ronautics, Nanjing, 2 00 6, China) : Abstract Distribution regularity of the temperature field is studied according to the heat transfer theory and numerical simulation method. Considering the thermophysical parameters, heat convection and phase-change latent heat, the computing model of transient temperature field of 3-D moving jet electro- plated coating laser re-melting is built w ith finite element method. In the laser re-melting process of jet , - , electroplated nickel coating to obtain a model of the thick hard zone and good quality superficial coat appropriate laser processing parameters, such as laser pow er, scanning speed and facular radius, are se- lected, thus obtaining the ideal hard zone. : ; -