箍筋约束混凝土单轴滞回本构实用模型详解.pdfVIP

第 28 卷第 9 期 Vol.28 No.9 工 程 力 学 2011 年 9 月 Sep. 2011 ENGINEERING MECHANICS 95 文章编号：1000-4750(2011)09-0095-08 箍筋约束混凝土单轴滞回本构实用模型 * 1 2 1 齐 虎 ，李云贵 ，吕西林 (1. 同济大学结构工程与防灾研究所，上海 200092 ；2. 中国建筑科学研究院建筑工程软件研究所，北京 100013) 摘 要：该文深入研究了箍筋约束混凝土单轴滞回本构模型，并利用 ABAQUS 二次开发功能对 6 种典型的模型 进行计算分析。通过各模型计算结果与试验结果的比较以及各模型之间的比较，从受压骨架曲线，受压滞回曲线， 受拉滞回曲线 3 个方面，研究了各模型的准确性和计算效率。在对比分析的基础上，建立了一个与实验符合较好、 且考虑复杂加载路径的混凝土单轴滞回实用本构模型。该模型受压骨架曲线采用 Mander 模型，受压滞回曲线采 用本文提出的模型，受拉滞回曲线采用腾-邹模型。 关键词：混凝土单轴本构模型；实用本构模型；加载路径；滞回曲线；骨架曲线 中图分类号：TP375 文献标志码：A A PRACTICAL CONFINED CONCRETE CONSTITUTIVE MODEL UNDER UNIAXIAL HYSTERESIS LOAD * 1 2 1 QI Hu , LI Yun-gui , LU Xi-lin (1. Institute of Structural Engineering and Disaster Reduction, Tongji University, Shanghai 200092; 2. Institute of Building Engineering Software, China Academy of Building Research, Beijing 100013, China) Abstract: To develop a constitutive model for confined concrete under uniaxial hysteresis load, six kinds of typical models were studied and compared by the use of ABAQUS UMAT. Through the comparison between model calculations and experimental results of these models, the accuracy and computational efficiency of each model were investigated considering three aspects: compression skeleton curve, compression hysteresis curve, and tension hysteresis curve. Finally, a practical concrete uniaxial constitutive model for hysteretic loading was developed, which is capable of considering complex loading paths by