ADVANCED ENGINEERING ANALYSIS Knud E. （先进的工程分析克纳E。）.pdf

ADVANCED ENGINEERING ANALYSIS DRIVING YOUR ENGINEERING FROM CONCEPT TO PRODUCTION Dynamic simulation KNUD E. HANSEN A/S NAVAL ARCHITECTS  DESIGNERS  MARINE ENGINEERS DYNAMIC SIMULATION Knud E. Hansen A/S can help studying the dynamics of moving parts, how loads and forces are distributed throughout mechanical systems, and how to improve and optimize the performance of your designs. With the use of the most advanced multibody dynamics and motion analysis software, models of mechanical systems can be easily created and tested in a very short time. The analysis incorporates real-world physics by simultaneously solving equations for kinematic, static, quasi-static, and dynamic problems such as: • Static and dynamic structure analysis • Buckling analysis • Flexible body analysis • Natural vibration characteristics • Structure response to external loading factors • High velocity and impact analysis • Stress, strain, or life of components in a system model • Damage and failure analysis • Correctly modeling welded, and fastened assemblies, as well as jointed connections • 3d contact simulation to account for complex assembly interactions • Complex mechanical assemblies that require a dynamic analysis KNUD E. HANSEN A/S DYNAMIC SIMULATION SOME MARINE APPLICATIONS DP OF MARINE VEHICLES AND OFFSHORE STRUCTURES Calculation of the required steering angle and thruster output for each thruster to maintain vessel’s position and heading. Any type of equation or collection of data describing magnitude and direction of the environmental forces affecting the vessel’s position can be applied to the dynamic model. Dynamic positioning may either be calculated in absolute (po