Cabinetmaking System Instruction Book Lee （家俱制造系统说明书李）.pdf

Cabinetmaking System Instruction Book 05J06.00 ® You now have Veritas 32, the cabinetmaking system for constructing cabinets of all kinds, but particularly suited to European-style cabinetry. We suggest that you fi rst unpack and examine the components, check that all are there and familiarize yourself with the parts for reference as you read further. The Complete System consists of: • fitted wooden box Clamp Heads Bush 15 Clamp 3/32 Connector End Rods Clamp Tails With Nuts (2) Carrier Rods (2) Hex Key Plate (2) (2) Register End Rod Pins (2) Clamp Heads (2) Gauge Dowel Jig Gauge 5mm, 8mm, 10mm 3/32 Rail Fixing Rule Frames (2) Stop Bushings Screws (6) * Cut-outs identified with an asterisk (*) come plugged, and will hold additional bushings once unplugged. The 3/32 bushing is the only unhardened bushing, and while locked in the bush carrier, may be drilled to any size not offered. • three rails • two 25 rods The Basic Jig has fewer parts. They are: • one rail with fixing screws • two 15 rods with clamp heads, tails and fixing screws • bush carrier • register pin • 3/32 hex key • 5mm bushing • 8mm bushing • 10mm bushing • 3/32 soft bushing 2 The European System Veritas 32 was designed to make available to the home craftsman the cabinetmaking system that was developed in post-war Europe. The European system is frameless as opposed to North American face-frame construction. It is bas