Cellular Glass Insulation Welcome to SPI（泡沫玻璃保温欢迎来到SPI）.pdf

Cellular Glass Insulation (Commonly referred to as FOAMGLAS®) Description Cellular Glass insulation is rigid, lightweight material containing millions of completely sealed glass cells. This unique cell structure is inherently water resistant and provides a highly effective vapor barrier (will not absorb flammable liquids or vapors). It is also unaffected by common chemicals and by most corrosive environments. The material is available in sectional pipe covering and fittings, board segments for equipment and curved segments for tank wall and head applications. Cellular glass insulation can be applied and coated with a variety of available adhesives and finishes Uses Pipe, fittings, curved segments, precision machined tank For use on piping, fittings, equipment and tanks operating heads and basic block insulations are supplied for a wide in the temperature range of -450° F (-268° C) to 900° F variety of above and underground applications. Cellular (482° C). For applications above 400° F, contact your Glass insulation sections are fabricated with reactive local SPI Fabrication center for system recommendations. gypsum or bituminous adhesive. Typical applications include: low to high temperature pipe, equipment and tanks in the petrochemical industry, above and below ground steam and chilled piping systems as well as commercial piping and ductwork. Advantages Constant insulating efficiency Closed cell, does not absorb liq