CFD MODELLING OF LIQUID JET AND CASCADE （CFD模拟的液体喷射和级联）.pdf

Seventh International Conference on CFD in the Minerals and Process Industries CSIRO, Melbourne, Australia 9-11 December 2009 CFD MODELLING OF LIQUID JET AND CASCADE BREAKUP IN CROSSFLOWS Benny KUAN Process Science and Engineering, Commonwealth Scientific and Industrial Research Organisation Box 312, Clayton South, VIC 3169, AUSTRALIA ABSTRACT By comparison, liquid droplets used in some industrial Formation and breakup of liquid droplets play key roles in processes, such as spray cooling towers, need to be a wide range of chemical processes, most of which are introduced in such a way that facilitates maximum contact concerned with atomising the liquid into fine droplet between a large body of gas and the liquid. In cases sprays in a co-flow environment where the liquid jet is where the gas temperature is considerably less than sandwiched between high-velocity air streams to produce boiling point of the liquid, liquid droplets can be sprayed a droplet cloud. The present work deals with droplet directly onto the gas to strip the solids off the particle- breakup in a cross-flow environment where the air stream laden gas stream. However, for processes where the directly impacts onto a liquid jet or column. A CFD liquid also plays a significant role in cooling the gas model has been developed for the breakup of this liquid through vaporisation, it is not appropriate to spray fine je