Control Valve Sizing ProQuip, Inc.（控制阀上浆,ProQuip Inc .)）.pdf

Sizing Selection 3 Control Valve Sizing CONTENTS a valve with a one psi pressure drop. The general Introduction 3-1 Equation for C is as follows: v Nomenclature 3-1 Calculating C for Liquids 3-3 Cv = flow specific gravity at flowing temperature v Liquid Sizing Examples 3-7 pressure drop Calculating C for Gases. 3-10 v When selecting a control valve for an application, the Gas Sizing Examples 3-13 calculated C is used to determine the valve size and the Calculating C for Two Phase Flow 3-15 v v trim size that will allow the valve to pass the desired flow Vapor Pressure Charts 3A-1 Steam Tables 3A-7 rate and provide stable control of the process fluid. Fluid Property Correlation Constants 3A-21 Pressure Profile Pipe Data 3A-29 Fluid flowing through a control valve obeys the basic INTRODUCTION laws of conservation of mass and energy, and the continuity Equation. The control valve acts as a restric- Valtek uses a systematic method for selecting body tion in the flow stream. As the fluid stream approache