Cromax 482 Ovako06Eng Ovako Ovako（482年Cromax Ovako06Eng Ovako Ovako）.pdf

® CROMAX IH482 Induction-hardened, hard-chrome bar Induction-hardened Cromax® IH 482 is based on a medium carbon, Average chemical analysis Cromax® IH 482 micro-alloyed steel, which is characterised by high strength in the C % Si % Mn % S % V % C.E. %( ) * as-rolled condition, i.e. without heat treatment. The 482 base steel 0.39 0.40 1.20 0.02 0.13 max 0.72 is a cost-effective alternative to traditional low-alloy, quenched and *C.E. = % C + % Mn/6 + (% Cu + % Ni)/15 + (% Cr + % Mo + % V)/5 tempered grades with, in the context of piston-rod applications, equivalent properties. Corresponding standards The analysis of the base steel in Cromax IH 482 is well adapted to The table shows the closest equivalent standard for the steel in Cromax induction hardening and a high and uniform hardness is achieved IH 482. In most cases, the correspondence is only approximate. throughout the case irrespective of diameter. In consequence, the Cromax EN DIN AFNOR SAE/ASTM resistance to even high-energy external impact is excellent. 482 38MnVS6 38MnSiVS5 30MV6 1045V Mechanical properties Yield stress, Ultimate tensile Elongation, Hardness, Toughness, 2