DESIGN AND SIZING OF SCREW FEEDERS （螺旋供料器的设计和大小）.pdf

International Congress for Particle Technology DESIGN AND SIZING OF SCREW FEEDERS By Marco Bortolamasi Johannes Fottner Abstract Screw devices and other systems. This paper is concerned with the design criteria Screw feeders are devices suitable for handling of screw feeders: a non proper design and a wide variety of materials that have good selection of this device, which is present in large flowability characteristics. The screw feeder has part of industrial processes, could mean poor a helicoidal surface fitted on a shaft that rotates performances, excessive power, severe wear of inside a fixed tube. The material which comes plant and degradation of the conveyed material. out of the silo is pushed by the helicoid flight along the base of the tube in the direction of In the past the performance of screw feeders has transport. The advantages of the screw feeder been based either on a semi-empirical approach include the possibility of having different (C.E.M.A.- like procedure) or on experimental openings, each with its own shut-off organ for studies using dynamic similarity to predict the unloading the material. performance of geometrically similar sc